Step 3: Connect the tablets to the WiFi
When the tablets are charged and the Access Points are plugged in, you can connect the tablets to the Wi-Fi.
Switching on the tablet
Switch on the tablet by pressing the black button located at the bottom right of the tablet. Hold the button for a couple of seconds until the Snappet logo appears. If the tablet is on stand-by mode, a short press is sufficient.
Head menu in Snappet tablet
The tablet needs time to start up, and after approximately 30 seconds the main menu will appear. The main menu consists of five items:
- The Snappet app
- Settings
- Check updates
- Network diagnosis
- Reset WIFI
- Wifi-settings
Connecting to the Wi-Fi
In order to connect to a Wi-Fi network, you need to go to the Wi-Fi Settings on the tablet. Here you will find the available networks. Either select the network name that is on the label at the back of the Access Point or select your own Wi-Fi network name. When using the Snappet Wi-Fi, fill in the password 07j@n2013. When selecting your own Wi-Fi network, enter your own password.
